There is a variety of different types of memory, and it is important that you choose memory that is compatible with your notebook computer.
notebook computer memory
With the proliferation of laptop computers, choosing to upgrade or implement notebook computer memory is not as straight forward as it may seem at first.
There is a variety of different types of memory, and it is important that you choose memory that is compatible with your notebook computer. Memory is also a little delicate, so you need to be very careful when handling it.
Adding Computer Memory – Some Tips
You should ensure that the Notebook is turned of and disconnected from any exterior power supply. No lights should be visible, and if they are, stop and double check for any live power sources.
Notebook computers are a little different to desktop PC’s in that there is no need to take them apart in order to add memory. Access to the memory slots is via a panel located (usually) in the bottom of the laptop. Once you have found this panel, it should be a small matter of using a screwdriver to open up the panel and view the existing memory. In fact, you can do this to check the exact type of memory that your Notebook currently uses, because it is usually shown on the front of the memory strips and should be visible when you open up the memory panel.
The memory strips are usually locked in with small clips on the ends of the strips. To remove existing memory, simply flip the clips and then pull the memory strips gently from their holding place. If you are simply adding memory of course, and there is space available, just add the new memory, gently pushing it in to ensure it is fully seated in the slots, and then close the clips to hold the new memory in place.
Once you have replaced or added your Notebook computer memory, it is simply a case of replacing the access panel, and then screwing the panel back in place.
Finally, power up the Notebook, and ensure that the memory has been read by the Notebook. When the PC starts up, it should count the memory and tell you how much it thinks it has access to.
If any problems occur, repeat the whole procedure, checking very carefully that the memory is properly seated in the notebook.